1～4 item / All 4 items
Designed to inject electromagnetic pulses into safety-critical circuits with high temporal and spatial resolution.
Product Highlights - Maximum voltage for interference pulse generation is up to 1000 V - Two interference pulses can be generated continuously within 25 ns - Probe tip with a coil diameter of 250 µm (depending on the model)
![[Development Case] Timing Generation Device](https://image.www.ipros.com/public/product/image/0b6/2000687271/IPROS04334911855669838463.png?w=280&h=280)
We will introduce a case of developing a device that can simultaneously control two ultraviolet exposure devices with high speed and high precision.
We would like to introduce a development case of the "Timing Generation Device" from the Technology Development Department of Kyoritsu Electric Co., Ltd. Our company received a request for a substrate that can simultaneously control two ultraviolet exposure devices for semiconductor production equipment with high speed and high precision. In response, we developed a signal pulse generation device that provides signals to the two ultraviolet generation devices. 【Case Overview】 ■ Requirements - A substrate that can simultaneously control two ultraviolet exposure devices for semiconductor production equipment with high speed and high precision. ■ Developed Device - Signal pulse generation device for the two ultraviolet generation devices. *For more details, please refer to the PDF document or feel free to contact us.
It is possible to start/stop pulse output at a specified time! Introduction to the satellite ranging system.
The "RGG" is a pulse generator that differs from commercially available delay generators. It outputs one reference pulse (1ch) and seven delayed pulses from the reference pulse (7ch), with two of the pulses allowing for the delay amount to be specified at one-second intervals, enabling variable delay output. Additionally, the target guidance software controls telescopes and stages to guide a bright point (target position) on a video image to the target location. It can be used for alignment and tracking. 【Features】 ■ Satellite ranging system ■ Ability to specify the start/stop of pulse output at designated times ■ Target guidance software can be utilized for alignment and tracking *For more details, please refer to the PDF document or feel free to contact us.
Can be installed on the welding machine without modifications! The heat impact on the surroundings is minimal, so distortion can also be minimized.
The "TIGCON-T Pulse" is a pulse controller that enables welding of metals with a thickness of 0.3mm or less. In the standard pulse mode equipped with TIG welding machines, the output varies, but this product allows for the ON-OFF setting of the welding current output in units of 0.001 seconds. Additionally, it allows for switching between normal welding and pulse mode via a switch operation, preventing mistakes such as burn-through during thin plate welding, and minimizing thermal impact on the surrounding area, which helps reduce distortion. 【Features】 ■ Precisely controls the ON-OFF of the welding current like a pulse ■ Compatible with standard torch switches or foot switches ■ Prevents mistakes such as burn-through during thin plate welding ■ Minimizes thermal impact on the surrounding area, thus reducing distortion ■ Can be installed on welding machines without modification *For more details, please refer to the PDF document or feel free to contact us.
